Ahmed A S Mohamed

0
Energy_Systems_Lab_Logo_Final
Biography :  Ahmed A S Mohamed was born in Egypt, in 1986. He received the B.S. and M.S. degrees in Electrical Engineering from Zagazig University, Egypt, in 2008 and 2012, respectively. He is currently pursuing the Ph.D. degree in electrical engineering at Florida International University, Energy Systems Research Laboratory, USA.
From 2008 to 2013, he was a Research and Teaching Assistant with the Department of Electrical Power and Machines, Zagazig University, Egypt. His research focus on modelling, design and control of inductive wireless power transfer systems for as well as smart-grid applications. Additionally, his research interests include maximum power point tracking of Photovoltaic systems, DC-DC converters, electrical machines, artificial intelligence, active power filtering, and adaptive control.
Mr. Mohamed was a recipient of the Best Paper Award in the Travel Scholarships Special Poster Session at the IEEE IECON Conference, Dallas, TX, in October 2014.
Research Interest  Ahmed A S Mohammed

  • Wireless Power Transfer for Eclectic Vehicles Applications.
  • Photovoltaic Systems Applications.
  • Artificial Intelligent applications in Power System (Fuzzy Logic Controller and Genetic Algorithm).
  • Electrical Machines and Power Electronics.
  • Electromagnetic Interference (EMI) and Finite Element analysis.
  • Adaptive control for Active Power Filters
Publications
  1. A. Mohamed, A. Berzoy, and O. Mohammed, “Experimental Validation of Comprehensive Steady-state Analytical Model of Bidirectional WPT System in EVs Applications,” IEEE Trans. Veh. Technol., vol. PP, no. 99, pp. 1–1, 2016.
  2. A. A. S. Mohamed, A. Berzoy, and O. Mohammed, “Design and Hardware Implementation of FL MPPT Control for PV Systems Based on GA and Small-Signal Analysis,” IEEE Trans. Sustain. Energy, vol. PP, no. 99, pp. 1–1, 2016.
  3. A. Berzoy, A. A. S. Mohamed, and O. Mohammed, “Complex-Vector Model of Inter-Turn Failure in Induction Machines for Fault Detection and Identification,” IEEE Trans. Ind. Appl., vol. PP, no. 99, pp. 1–1, 2016.
  4. Alberto Berzoy, A. A. S. Mohamed, and Osama Mohammed, “Optimizing power converter PCB design for lower EMI,” COMPEL – Int. J. Comput. Math. Electr. Electron. Eng., vol. 34, no. 5, pp. 1364–1380, Sep. 2015.
  5. A. A. S. Mohamed, A. Berzoy, F. G. N. de Almeida, and O. Mohammed, “Steady-state performance assessment of different compensation topologies in two-way IWPT system for EV ancillary services,” in 2016 IEEE Industry Applications Society Annual Meeting, 2016, pp. 1–8.
  6. A. A. S. Mohamed, A. Berzoy, and O. A. Mohammed, “Physics-Based Co-Simulation Platform for EMC Analysis of Two-Way Inductive WPT System in EV Applications,” in 2016 IEEE Vehicle Power and Propulsion Conference (VPPC), 2016, pp. 1–6.
  7. A. A. S. Mohamed, A. Berzoy, and O. A. Mohammed, “Physics-based FE model and analytical verification of bi-directional inductive wireless power transfer system,” in 2016 IEEE/ACES International Conference on Wireless Information Technology and Systems (ICWITS) and Applied Computational Electromagnetics (ACES), 2016, pp. 1–2.
  8. A. A. S. Mohamed, D. Allen, T. Youssef, and O. Mohammed, “Optimal design of high frequency H-bridge inverter for wireless power transfer systems in EV applications,” in 2016 IEEE 16th International Conference on Environment and Electrical Engineering (EEEIC), 2016, pp. 1–6.
  9. A. A. S. Mohamed, F. G. N. de Almeida, and O. Mohammed, “Harmonics-based steady-state mathematical model of bidirectional inductive wireless power transfer system in V2G applications,” in 2016 IEEE Transportation Electrification Conference and Expo (ITEC), 2016, pp. 1–6.
  10. A. Berzoy, A. A. S. Mohamed, and O. A. Mohammed, “Inter-turn short-circuit fault model for magnetically coupled circuits: A general study,” in 2016 IEEE Industry Applications Society Annual Meeting, 2016, pp. 1–7.
  11. A. Berzoy, A. A. S. Mohamed, and O. Mohammed, “Design considerations and predictive direct current control of Active Regenerative Rectifiers for harmonic and current ripple reduction,” in 2016 IEEE Applied Power Electronics Conference and Exposition (APEC), 2016, pp. 928–935.
  12. A. A. S. Mohamed, A. Berzoy, and O. Mohammed, “Power Flow Modeling of Wireless Power Transfer for EVs Charging and Discharging in V2G Applications,” in 2015 IEEE Vehicle Power and Propulsion Conference (VPPC), 2015, pp. 1–6.
  13. A. A. S. Mohamed, A. Berzoy, and O. A. Mohammed, “Design analysis of adaptive digital filter for reference current detection in active power filter,” in SoutheastCon 2015, 2015, pp. 1–7.
  14. A. A. S. Mohamed, A. Berzoy, and O. A. Mohammed, “Control parameters optimization for PM DC motor in photovoltaic applications,” in Electric Machines Drives Conference (IEMDC), 2015 IEEE International, 2015, pp. 1742–1747.
  15. A. A. S. Mohamed, A. Berzoy, and O. A. Mohammed, “Adaptive Transversal digital Filter for reference current detection in shunt active power filter,” in 2015 IEEE Power Energy Society General Meeting, 2015, pp. 1–5.
  16. A. Berzoy, A. A. S. Mohamed, and O. A. Mohammed, “Optimum positioning of inductive components on PCB designs for EMI reduction using a 3D finite elements and genetic algorithms,” in Applied Computational Electromagnetics (ACES), 2015 31st International Review of Progress in, 2015, pp. 1–2.
  17. A. Berzoy, A. A. S. Mohamed, and O. A. Mohammed, “Dynamic space-vector model of induction machines with stator inter-turn short-circuit fault,” in IECON 2015 – 41st Annual Conference of the IEEE Industrial Electronics Society, 2015, pp. 003620–003625.
  18. A. O. Hariri, A. Berzoy, A. A. S. Mohamed, and O. A. Mohammed, “Performance evaluation of a wireless power transfer system using coupled 3D finite element-circuit model,” in 2015 IEEE Wireless Power Transfer Conference (WPTC), 2015, pp. 1–4.
  19. A. A. S. Mohamed, A. Berzoy, and O. Mohammed, “Optimized-fuzzy MPPT controller using GA for stand-alone photovoltaic water pumping system,” in IECON 2014 – 40th Annual Conference of the IEEE Industrial Electronics Society, 2014, pp. 2213–2218.
  20. A. Berzoy, A. a. S. Mohamed, and O. Mohammed, “Optimizing Power Converter PCB Magnetic Design for Lower EMI Levels,” in ResearchGate, 2014.
Contact  amoha070@fiu.edu, mohammed@fiu.edu

 

Share.

About Author

Comments are closed.