Submitted

Accepted

  1. M.R Barzegaran, A. Mazloomzadeh, O.A. Mohammed, “Identification of Short-circuit Location in Induction Motors using Radiated Electromagnetic Field Signatures,” Accepted to be presented at International Conference on Electrical Machines and Systems (ICEMS 2013).
  2. Ahmed Elsayed, A. Mohamed and O. A. Mohammed, ” DC Microgrids and Distribution Systems: An Overview,” Accepted to be published in the 2013 Power and Energy Society General Meeting, Vancouver, B.C., Canada, 21-25 Jul 2013.
  3. Ahmed Elsayed and O. A. Mohammed, ” Wavelet-Adaptive ANN Forecaster for Renewable Energy Sources for Continuous Supply in Microgrid Applications,” Accepted to be published in the 2013 Power and Energy Society General Meeting, Vancouver, B.C., Canada, 21-25 Jul 2013.
  4. T. Youssef, Ahmed Elsayed, A. Mohamed, and O. A. Mohammed, ” A Novel Smart Grid Controller for Bi-directional Grid Connected Inverters for Mitigation of Pulsed Loads on AC and DC Sides,” Accepted to be published in the proceedings of the 1st International Smart Grid Conference & Exhibition (ISGC&E 2013), Jeju, Korea, 8-11 July 2013.
  5. Ali Mazloomzadah, Mustafa Farhadi, O.A Mohammed “Hardware implementation of Hybrid AC-Dc power system Laboratory Involving Renewable energy sources” Accepted to be Presented in the American society for Engineering Education annual Conference,ASEE 2013
  6. Arash Nejadpak, Mohammadreza Barzegaran, Osama A. Mohammed, “Numerical Simulation of Far-field Electromagnetic Field Correlation between Components of Power Converter-Pulse Load System” , CEFC November 11-14 Oita Japan 2012
  7. A. Mohamed, V. Salehi and Osama Mohammed, “Reactive Power Compensation in Hybrid AC/DC Networks for Smart Grid Applications,” in Proc. of Innovative Smart Grid Technologies Conf., ISGT Europe 2012, Berlin, Germany, October 14-17, 2012
  8. M.R Barzegaran, O.A. Mohammed, “Multi-Dipole Modeling of XLPE Cable for Electromagnetic Field Studies in Large Power Systems,” The Sixth International Conference on Electromagnetic Field Problems and
    Applications (ICEF2012), June 19-21 2012, Dalian, China.
  9. A. Nejadpak, M.R Barzegaran, O.A. Mohammed, “Numerical Simulation of Low Frequency Far Fields form an Operating Multi-Component System Including Power Converter Load Switching,” Fifteenth Biennial IEEE
    Conference on Electromagnetic Field Computation (CEFC2012).
  10. Arash Nejadpak, Osama A. Mohamemd, “Physics-Based Thermal Modeling of Silicon Carbide Power Switching Devices Using Finite Elements”, Electric Machinery and Technology Symposium 2012, ASNE , May 23-24, Philadelphia, US
  11. M.R Barzegaran, O.A. Mohammed, “Near Field Evaluation of Electromagnetic Signatures from Wound Rotor Synchronous Generators using Wire Modeling in Finite Element domain” 28th Annual Review of Progress in Applied Computational Electromagnetics, Columbus, OH, USA Apr. 2012.
  12. Arash Nejadpak, Osama A. Mohammed, “Finite Element Physics Based Modeling of Cross-Talk Effect on PCB Traces,”, 28th Annual Review of Progress in Applied Computational Electromagnetics, Columbus, OH, USA, April 10-14, 2012.

Published

  1. M.R Barzegaran, O.A. Mohammed, “3DFE Wire Modeling and Analysis of Electromagnetic Signatures from Electric Power Drive Components and Systems,” Fifteenth Biennial IEEE Conference on Electromagnetic Field Computation (CEFC2012), Vol.49, No.5, Page(s): 1937-1940
    doi: 10.1109/TMAG.2013.2243716
    URL: http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=6514710
  2. M.R Barzegaran, A. Nejadpak, O.A. Mohammed, “Condition Monitoring of PM Synchronous Motor Using High-Frequency Signal Injection in Low Speed Senseless Control Algorithm,” IEEE International Electric Machines and Drives Conference IEMDC 12-15 May 2013, pp-716-721
    doi: 10.1109/IEMDC.2013.6556172
    URL:http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=6556172
  3. M.R Barzegaran, O.A. Mohammed, “Investigation of the Magnetic Signatures of Unbalanced Currents of Electric Motor Operation Using Finite Element Method and Neural Networks” presented at 29th Annual Review of Progress in Applied Computational Electromagnetics, Monterey, CA, USA Mar. 2013, Volume: Computational Electromagnetics for EM – Signature Control
  4. Tan Ma, Ahmed Elsayed and O. A. Mohammed, “Educational Experiments in Renewable Energy Analysis, Forecasting, and Management in Hybrid Power System,” Published in the Proceedings of the 120th ASEE Annual Conference & Exposition, Atlanta, USA, 23-26 June 2013, Paper ID# 8022
    URL: www.asee.org/public/conferences/20/papers/8022/download
  5. M.R Barzegaran, A. Nejadpak, O.A. Mohammed, “Electromagnetic signature study of the power converter connected to an electric motor drives,” Conference on the Computation of Electromagnetic Fields (COMPUMAG 2013).
    URL:Read on Google Cache
  6. A. Mohamed, V. Salehi and Osama Mohammed, “Reactive Power Compensation in Hybrid AC/DC Networks for Smart Grid Applications,” in Proc. of Innovative Smart Grid Technologies Conf., ISGT Europe 2012, Berlin, Germany, October 14-17, 2012, Page(s): 1-6.
    doi:10.1109/ISGTEurope.2012.6465770
    URL: http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=6465770
  7. Mohamed, A. Ghareeb, T. Youssef and O. A. Mohammed, “Wide area monitoring and control for voltage assessment in smart grids with distributed generation,” 2013 PES Innovative Smart Grid Technologies Conference (ISGT),Washington, D.C., USA, 24-27 Feb 2013, Page(s): 1-6
    doi: 10.1109/ISGT.2013.6497849
    URL: http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=6497849
  8. Arash Nejadpak, Ali Sarikhani, Osama A. Mohammed, “Analysis of Radiated EMI and Noise Propagation in Three-Phase Inverter System Operating Under Different Switching Patterns”, CEFC November 11-14 Oita Japan 2012, Volume.49 Issue.5, Page(s): 2213-2216
    doi: 10.1109/TMAG.2013.2240667
    URL:http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=6514759
  9. Ali Sarikhani, Arash Nejadpak, Osama A. Mohammed, “Estimation of Operational Inductance in Permanent Magnet Synchronous Machines by a Real-time Physics-based inductance Observer” , CEFC November 11-14 Oita Japan 2012, Volume.49 Issue.5, Page(s): 2283-2286
    doi: 10.1109/TMAG.2013.2243715
    URL:http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=6514748
  10. Mohamed, Ahmed; de Cossio, Carlos Fernandez; Tan Ma; Farhadi, Mustafa; Mohammed, Osama; , “Operation and protection of photovoltaic systems in hybrid AC/DC smart grids,” IECON 2012 – 38th Annual Conference on IEEE Industrial Electronics Society , vol., no., pp.1104-1109, 25-28 Oct. 2012
    doi: 10.1109/IECON.2012.6388618
    URL:http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=6388618&isnumber=6388505
  11. Salehi, Vahid; Mohamed, Ahmed; Mohammed, Osama A.; , “Implementation of real-time optimal power flow management system on hybrid AC/DC smart microgrid,” Industry Applications Society Annual Meeting (IAS), 2012 IEEE , vol., no., pp.1-8, 7-11 Oct. 2012
    doi: 10.1109/IAS.2012.6374113
    URL:http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=6374113&isnumber=6373971
  12. Ma, Tan; Mohamed, Ahmed; Mohammed, Osama; , “Optimal charging of plug-in electric vehicles for a car park infrastructure,” Industry Applications Society Annual Meeting (IAS), 2012 IEEE , vol., no., pp.1-8, 7-11 Oct. 2012
    doi: 10.1109/IAS.2012.6374035
    URL:http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=6374035&isnumber=6373971
  13. Mohamed, Ahmed A.; Mohammed, Osama A.; , “Real-time load emulator for implementation of smart meter data for operational planning,” Power and Energy Society General Meeting, 2012 IEEE , vol., no., pp.1-6, 22-26 July 2012
    doi: 10.1109/PESGM.2012.6345619
    URL:http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=6345619&isnumber=6343905
  14. Sarikhani, Ali; Mohammed, Osama; , “Design of Physics-based EMF Observer for sensorless control of PM synchronous machines,” Power and Energy Society General Meeting, 2012 IEEE , vol., no., pp.1-6, 22-26 July 2012
    doi: 10.1109/PESGM.2012.6345112
    URL:http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=6345112&isnumber=6343905
  15. Sarikhani, Ali; Mohammed, Osama A.; , “Inter-turn fault detection in PM synchronous machines by physics-based EMF estimation,” Energy Conversion Congress and Exposition (ECCE), 2012 IEEE , vol., no., pp.1254-1261, 15-20 Sept. 2012
    doi: 10.1109/ECCE.2012.6342672
    URL:http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=6342672&isnumber=6342155
  16. Sarikhani, Ali; Mohammed, Osama; , “Real-time demagnetization assessment of PM synchronous machine,” Electrical Machines (ICEM), 2012 XXth International Conference on , vol., no., pp.2418-2424, 2-5 Sept. 2012
    doi: 10.1109/ICElMach.2012.6350222
    URL:http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=6350222&isnumber=6349821
  17. Sarikhani, A.; Mohammed, O. A.; , “Demagnetization Control for Reliable Flux Weakening Control in PM Synchronous Machine,” Energy Conversion, IEEE Transactions on , vol.PP, no.99, pp.1-10, 0
    doi: 10.1109/TEC.2012.2217968
    URL:http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=6335468&isnumber=4358729
  18. Mohamed, Ahmed; Nejadpak, Arash; Mohammed, Osama , “LCL-filter-based bi-directional converter for connectivity of microgrids involving sustainable energy sources,” North American Power Symposium (NAPS), 2012 , vol., no., pp.1-6, 9-11 Sept. 2012
    doi: 10.1109/NAPS.2012.6336334
    URL:http:// ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=6336334&isnumber=6336304
  19. Barzegaran, M. R.; Mohammed, O. A.; , “A Generalized Equivalent Source Model of AC Electric Machines for Numerical Electromagnetic Field Signature Studies,” Magnetics, IEEE Transactions on , vol.48, no.11, pp.4440-4443, Nov. 2012
    doi: 10.1109/TMAG.2012.2197673
    URL:http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=6332857&isnumber=6332554
  20. Nejadpak, Arash; Mohammed, Osama A.; , “Physics-Based Optimization of EMI Performance in Frequency Modulated Switch Mode Power Converters,” Electromagnetic Field Problems and Applications (ICEF), 2012 Sixth International Conference on , vol., no., pp.1-4, 19-21 June 2012
    doi: 10.1109/ICEF.2012.6310282
    URL: http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=6310282&isnumber=6310271
  21. Mohamed, A.; Vanteddu, S.; Mohammed, O.; , “Protection of bi-directional AC-DC/DC-AC converter in hybrid AC/DC microgrids,” Southeastcon, 2012 Proceedings of IEEE , vol., no., pp.1-6, 15-18 March 2012 doi: 10.1109/SECon.2012.6196958
    URL:http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=6196958&isnumber=6196883
  22. Mohamed, A.; Vanteddu, S.; Mohammed, O.; , “Protection of bi-directional AC-DC/DC-AC converter in hybrid AC/DC microgrids,” Southeastcon, 2012 Proceedings of IEEE , vol., no., pp.1-6, 15-18 March 2012 doi: 10.1109/SECon.2012.6196958
    URL:http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=6196958&isnumber=6196883
  23. Amin, Mahmoud M.; Mohammed, Osama A.; , “A novel grid-connected multi-input boost converter for HEVs: Design and implementation,” Electric Vehicle Conference (IEVC), 2012 IEEE International , vol., no., pp.1-7, 4-8 March 2012 doi: 10.1109/IEVC.2012.6183243
    URL:http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=6183243&isnumber=6183155
  24. Nejadpak, A.; Mohammed, O.A.; , “Functional ON/OFF behavioral modeling of power IGBT using system identification methods,” Applied Power Electronics Conference and Exposition (APEC), 2012 Twenty-Seventh Annual IEEE , vol., no., pp.1826-1832, 5-9 Feb. 2012 doi: 10.1109/APEC.2012.6166070
    URL:http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=6166070&isnumber=6165780
  25. Mazloomzadeh, A.; Salehi, V.; Mohammed, O.; , “Soft synchronization of dispersed generators to micro grids for smart grid applications,” Innovative Smart Grid Technologies (ISGT), 2012 IEEE PES , vol., no., pp.1-7, 16-20 Jan. 2012 doi: 10.1109/ISGT.2012.6175812
    URL:http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=6175812&isnumber=6175527
  26. Salehi, Vahid; Mazloomzadeh, Ali; Fernandez, Juan F.; Mohammed, Osama A.; , “Real-time power system analysis and security monitoring by WAMPAC systems,” Innovative Smart Grid Technologies (ISGT), 2012 IEEE PES , vol., no., pp.1-8, 16-20 Jan. 2012 doi: 10.1109/ISGT.2012.6175768
    URL:http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=6175812&isnumber=6175527
  27. Mohamed, A.; Mohammed, O.A.; , “Smart vector-decoupling control of three phase rectifiers for grid connectivity of sustainable energy sources,” Innovative Smart Grid Technologies – Middle East (ISGT Middle East), 2011 IEEE PES Conference on , vol., no., pp.1-6, 17-20 Dec. 2011
    doi: 10.1109/ISGT-MidEast.2011.6220815
    URL: http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=6220815&isnumber=6220777
  28. Salehi, V.; Mohammed, O.; , “Developing virtual protection system for control and self-healing of power system,” Industry Applications Society Annual Meeting (IAS), 2011 IEEE , vol., no., pp.1-7, 9-13 Oct. 2011
    doi: 10.1109/IAS.2011.6074472
    URL: http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=6074472&isnumber=6074261
  29. Mohamed, A.; Mohammed, O. “Connectivity of DC microgrids involving sustainable energy sources,” Industry Applications Society Annual Meeting (IAS), 2011 IEEE , pp.1-8, 9-13 Oct. 2011, doi: 10.1109/IAS.2011.6074338, Orlando, FL.
    URL: http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=6074338&isnumber=6074261
  30. Elshaer, M.; Mohamed, A.; Mohammed, O.A. “Smart optimal control of DC-DC boost converter for intelligent PV systems,” Intelligent System Application to Power Systems (ISAP), 2011 16th International Conference on , pp.1-6, 25-28 Sept. 2011 doi: 10.1109/ISAP.2011.6082252, Crete, Greece.
    URL: http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=6082252&isnumber=6082157
  31. Amin, M.M.; Mohammed, O.A. “A three-phase high frequency semi-controlled battery charging power converter for plug-in hybrid electric vehicles,” Energy Conversion Congress and Exposition (ECCE), 2011 IEEE , pp.2641-2648, 17-22 Sept. 2011 doi: 10.1109/ECCE.2011.6064122.
    URL: http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=6064122&isnumber=6063732
  32. M. Amin, H. Moussa, and O. A. Mohammed, “Development of A Wide Area Measurement System for Smart Grid Applications,” 18th World Congress of the International Federation of Automatic Control (IFAC) Invited Session conference, IFAC 2011 proceedings, Vol. 18, Part 1,Elsever DOI 10.3182/20110828-6-IT-1002.02204, Aug. 28-Sep.2, 2011, Milano, Italy.
  33. Barzegaran, M.R.; Sarikhani, A.; Mohammed, O.A. “An equivalent source model for the study of radiated electromagnetic fields in multi-machine electric drive systems,” Electromagnetic Compatibility (EMC), 2011 IEEE International Symposium on , pp.442-447, 14-19 Aug., 2011, doi: 10.1109/ISEMC.2011.6038352.
    URL: http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=6038352&isnumber=6038267.
  34. A. Mohamed, M. Elshaer, O. Mohammed, “High-quality integration of fuel cells energy into electric grids,” in Proc. Of 4th International Symposium on Resilient Control Systems, ISRCS 2011, Boise, Idaho, USA, Pages 89-84, IEEE Xplore DOI 10.1109/ISRCS.2011.6016095, Aug 9-11, 2011.
    URL: http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=6016095
  35. Salehi, V.; Mohammed, O. “Real-time voltage stability monitoring and evaluation using Synchrophasors,” North American Power Symposium (NAPS), 2011 , pp.1-7, 4-6 Aug. 2011 doi: 10.1109/NAPS.2011.6024884.
    URL: http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=6024884&isnumber=6024838.
  36. Arash Nejadpak; Osama Mohammed “Physics Based Modeling of Power Converters from Finite Element Electromagnetic Field Computations,” 18th International Conference on the Computation of Electromagnetic Fields, record of COMPUMAG 2011, pp.79-80, July 2011– Sydney, Australia.
  37. Amin, M.M.; Mohammed, O.A. “Design and implementation of dc-bus system module for parallel integrated sustainable energy conversion systems,” Power and Energy Society General Meeting, 2011 IEEE , pp.1-8, 24-29 July 2011 doi: 10.1109/PES.2011.6039743.
    URL: http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=6039743&isnumber=6038815
  38. Salehi, V.; Mazloomzadeh, A.; Mohammed, O. “Real-time analysis for developed laboratory-based smart micro grid,” Power and Energy Society General Meeting, 2011 IEEE , pp.1-8, IEEE Xplore DOI 10.1109/PES.2011.6039769, 24-29 July 2011, Detroit, MI.
    URL: http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=6039769&isnumber=6038815.
  39. Salehi, V.; Mazloomzadeh, A.; Mohammed, O. “Development and implementation of a phasor measurement unit for real-time monitoring, control and protection of power systems,” Power and Energy Society General Meeting, 2011 IEEE , pp.1-7, IEEE Xplore DOI 10.1109/PES.2011.6039757, 24-29 July 2011.
    URL: http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=6039757&isnumber=6038815
  40. V. Salehi, , A. Mazloomzadeh, J. Fernandez, J. Parra, O. Mohammed, “Design and Implementation of laboratory-based Smart Power System”, Proceedings of the 2011 American Society for Engineering Education Annual Conference, ASEE, 2011, Vancouver, BC, Canada, June 26 – 29, 2011.
  41. Elshaer, M.; Mohamed, A.; Mohammed, O.A. “Integration of sustainable energy sources into DC zonal electric distribution systems,” Power and Energy Society General Meeting, 2011 IEEE , pp.1-7, 24-29 July 2011 doi: 10.1109/PES.2011.6039856.
    URL: http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=6039856&isnumber=6038815
  42. Mohamed, A.; Elshaer, M.; Mohammed, O. “Bi-directional AC-DC/DC-AC converter for power sharing of hybrid AC/DC systems,” Power and Energy Society General Meeting, 2011 IEEE , pp.1-8, 24-29 July, 2011, doi: 10.1109/PES.2011.6039868.
    URL: http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=6039868&isnumber=6038815
  43. Nejadpak, A.; Mohamed, A.; Mohammed, O.A.; Khan, A. A. “Online gain scheduling of multi-resolution Wavelet-based controller for acoustic noise and vibration reduction in sensorless control of PM-synchronous motor at low speed,” Power and Energy Society General Meeting, 2011 IEEE Xplore DOI 10.1109/PES.2011.6039714 , pp.1-6, 24-29, July 2011.
    URL: http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=6039714&isnumber=6038815
  44. Sarikhani, A.; Mohammed, O.A. “Inter-turn fault modeling of a variable speed pm wind generator using physics-based approach,” Electric Machines & Drives Conference (IEMDC), 2011 IEEE International , pp. 636-641, 15-18 May 2011 doi: 10.1109/IEMDC.2011.5994884.
    URL: http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=5994884&isnumber=5993850
  45. Sarikhani, A.; Mohammed, O.A. “Development of transient FE-physics-based model of induction for real time integrated drive simulations,” Electric Machines & Drives Conference (IEMDC), 2011 IEEE International , pp.687-692, 15-18 May 2011 doi: 10.1109/IEMDC.2011.5994894.
    URL: http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=5994894&isnumber=5993850
  46. Amin, M. M.; Mohammed, O.A. “DC-bus voltage control for hybrid 4-port high frequency parallel-connected sustainable energy conversion system,” Electric Machines & Drives Conference (IEMDC), 2011 IEEE International , pp.89-94, 15-18 May 2011, doi: 10.1109/IEMDC.2011.5994934.
    URL: http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=5994934&isnumber=5993850
  47. Elshaer, M.; Mohamed, A.; Mohammed, O. “Grid connected DC distribution system for efficient integration of sustainable energy sources,” Power Systems Conference and Exposition (PSCE), 2011 IEEE/PES , pp.1-9, 20-23 March 2011 doi: 10.1109/PSCE.2011.5772623.
    URL: http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=5772623&isnumber=5772439
  48. Nejadpak, A. Mohamed and O. Mohammed, “A wavelet based multi-resolution controller for sensorless position control of PM synchronous motors at low speed,” in Proc. of International Electric Machines and Drives Conference, IEMDC 2011, pp. 789-794, Niagara Falls, 15 –18 May 2011 pages 789-794, IEEE Xplore DOI 10.1109/IEMDC.2011.5994913, Niagara Falls, ON, Canada.
    URL: http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=5994913
  49. Nejadpak, A.; Barzegaran, M.; Mohammed, O. A. “Design of the high frequency electromagnetic behavior of planar inductor for resonant circuits in switching power converters,” Computation in Electromagnetics (CEM 2011), IET 8th International Conference on, pp.1-2, 11-14 April 2011, doi: 10.1049/cp.2011.0030.
    URL: http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=6085451&isnumber=6085421
  50. A Sarikhani, O.A. Mohammed, “Non-linear FE-base Modeling of induction machine for integrated drive,” IEEE Xplore DOI 10.1049/cp.2011.0031, IET 8th International Conference on Computation in Electromagnetics (CEM 2011), pp 1-2, 11-14 April 2011 CEM 2011, Monday, April, 11-14, 2011, Wroclaw, Poland.
  51. Amin, M.M.; Herrera, A.; Seijo, J.; Mohammed, O.A. “A digital signal controller for high frequency-based grid-tie inverter connected to wind emulator system: Design and implementation,” Power Systems Conference and Exposition (PSCE), 2011 IEEE/PES , pp.1-8, 20-23 March, 2011, doi: 10.1109/PSCE.2011.5772619.
    URL: http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=5772619&isnumber=5772439
  52. Barzegaran, M.R.; Sarikhani, A.; Mohammed, O.A. “An equivalent source model for the study of radiated electromagnetic fields in multi-machine electric drive systems,” Electromagnetic Compatibility (EMC), 2011 IEEE International Symposium on , pp.442-447, 14-19 Aug. 2011, doi: 10.1109/ISEMC.2011.6038352.
    URL: http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=6038352&isnumber=6038267
  53. Mohammadreza Barzegaran, Arash Nejadpak, Osama A. Mohammed, “High Frequency Electromagnetic Field Model for the Evaluation of Parasitic Elements in Power Converters,” 27th Annual Review of Progress in Applied Computational Electromagnetics, March 27-31, 2011, pp 623-629, Williamsburg, Virginia.
  54. Nejadpak, A.; Barzegaran, M.R.; Sarikhani, A.; Mohammed, O.A. “Design of planar inductor based Z-source inverter for residential alternate energy sources,” Applied Power Electronics Conference and Exposition (APEC), 2011 Twenty-Sixth Annual IEEE , IEEE Xplore DOI 10.1109/APEC.2011.5744824, pp.1698-1703, 6-11 March 2011.
    URL: http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=5744824&isnumber=5744557
  55. Amin, M.M.; Mohammed, O. A. “Development of a grid-connected wind generation system utilizing high frequency-based three-phase semi-controlled rectifier-current source inverter,” Applied Power Electronics Conference and Exposition (APEC), 2011 Twenty-Sixth Annual IEEE , pp.645-652, 6-11 March 2011 doi: 10.1109/APEC.2011.5744664.
    URL: http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=5744664&isnumber=5744557
  56. Sarikhani, A.; Mohammed, O. A. “Inter-turn fault modeling of a variable speed pm wind generator using physics-based approach,” Electric Machines & Drives Conference (IEMDC), 2011 IEEE International, pp. 636-641, 15-18 May 2011doi:10.1109/IEMDC.2011.5994884.
    URL: http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=5994884&isnumber=5993850
  57. Nejadpak, A.; Mirafzal, B.; Mohammed, O.; Lixiang Wei “Effects of different switching algorithms on the thermal behavior of IGBT modules under pulse-load conditions,” IECON 2010 – 36th Annual Conference on IEEE Industrial Electronics Society , pp.451-456, 7-10 Nov. 2010, doi: 10.1109/IECON.2010.5674984.
    URL: ttp://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=5674984&isnumber=5674827
  58. Amin, M.; Mirafzal, B.; Mohammed, O. “A dc-bus voltage regulation for parallel wind-based synchronous generators,” IECON 2010 – 36th Annual Conference on IEEE Industrial Electronics Society , pp.3161-3166, 7-10 Nov. 2010 doi: 10.1109/IECON.2010.5674978.
    URL: http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=5674978&isnumber=5674827
  59. Sarikhani, A.; Mirafzal, B.; Mohammed, O. “Inter-turn fault diagnosis of PM synchronous generator for variable speed wind applications using floating-space-vector,” IECON 2010 – 36th Annual Conference on IEEE Industrial Electronics Society , pp.2628-2633, 7-10 Nov. 2010, doi: 10.1109/IECON.2010.5675137.
    URL: http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=5675137&isnumber=5674827
  60. Elshaer, M.; Mohamed, A.; Mohammed, O. “Smart optimal control of DC-DC boost converter in PV systems,” Transmission and Distribution Conference and Exposition: Latin America (T&D-LA), 2010 IEEE/PES , pp.403-410, 8-10 Nov. 2010 doi: 10.1109/TDC-LA.2010.5762913.
    URL: http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=5762913&isnumber=5762851
  61. Amin, M.M.N.; Mohammed, O. A. “Power quality improvement of grid-connected wind energy conversion system for optimum utilization of variable speed wind turbines,” IECON 2010 – 36th Annual Conference on IEEE Industrial Electronics Society , pp.3287-3292, 7-10 Nov. 2010, doi: 10.1109/IECON.2010.5675336.
    URL: http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=5675336&isnumber=5674827
  62. Kaviani, A.; Elshaer, M.; Mohammed, O.A. “Enhancing loading limitations in PV systems,” IECON 2010 – 36th Annual Conference on IEEE Industrial Electronics Society , pp.2790-2794, 7-10 Nov. 2010, doi: 10.1109/IECON.2010.5675092.
    URL: http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=5675092&isnumber=5674827
  63. A. Sarikhani and O. A. Mohammed, “Electromagnetic Field Computation with External Circuit Coupling for Evaluating the Performance of Electric Motor Designs,” Record of the Applied Computational Electromagnetic Society Annual Conference (ACES 2010), Tempre, Finland, April 2010.
  64. Sarikhani, A.; Mohammed, O.A.; Saint-Hilaire, W. “Design improvement of coupled IPM motor-drive using physics-based motor model and evolutionary approaches,” Energy Conversion Congress and Exposition (ECCE), 2010 IEEE , pp.4115-4122, 12-16 Sept. 2010. doi: 10.1109/ECCE.2010.5617752.
    URL: http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=5617752&isnumber=5617696
  65. A. Mohamed, Mohamed. Elshaer and Osama Mohammed, “Smart Operation for AC Distribution Infrastructure Involving Hybrid Renewable Energy Sources,” in Proc. of the 18th IFAC World Congress, Vol. 18, Part 1, pp. 13679-13684, Milano, Italy, Aug. 28-Sept. 2010,
    URL: http://www.ifac-papersonline.net/Detailed/51969.html
  66. Amin, M.; Elshaer, M.; Mohammed, O. A. “DC bus voltage control for PV sources in a DC distribution system infrastructure,” Power and Energy Society General Meeting, 2010 IEEE , pp.1-5, 25-29 July 2010 doi:10.1109/PES.2010.5589625.
    URL: http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=5589625&isnumber=5588047
  67. Amin, M. M.; Mohammed, O. A. “DC-bus voltage control of three-phase PWM converters connected to wind powered induction generator,” Power and Energy Society General Meeting, 2010 IEEE , pp.1-7, 25-29 July 2010 doi:10.1109/PES.2010.5589626
    URL: http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=5589626&isnumber=5588047
  68. Ali Sarikhani, O. A. Mohammed “Design Challenges of Radial-Flux Synchronous Motors with a Common Stator,” American Society of Naval Engineers (ASNE) Electric Machines Technology Symposium, Philadelphia, May-2010.
  69. Salehi, V.; Mirafzal, B.; Mohammed, O. “Pulse-load effects on ship power system stability,” IECON 2010 – 36th Annual Conference on IEEE Industrial Electronics Society , pp.3353-3358, 7-10 Nov. 2010 doi:10.1109/IECON.2010.5675297
    URL: http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=5675297&isnumber=5674827
  70. Sarikhani, A.; Saint-Hilaire, W.; Mohammed, O.A. “A Study on the effect of PM machine design parameters changes on performance measures,” Power and Energy Society General Meeting, 2010 IEEE , pp.1-5, 25-29 July 2010 doi:10.1109/PES.2010.5589743
    URL: http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=5589743&isnumber=5588047
  71. Sarikhani, A.; Mohammed, O.A.; , “Hybrid GA-PSO multi-objective design optimization of coupled PM synchronous motor-drive using physics-based modeling approach,” Electromagnetic Field Computation (CEFC), 2010 14th Biennial IEEE Conference on , vol., no., pp.1, 9-12 May 2010
    doi: 10.1109/CEFC.2010.5481775
    URL:http://http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=5481775&isnumber=5480326>/a>
  72. Amin, M.; Mohammed, O.A. “Vector oriented control of voltage source PWM inverter as a dynamic VAR compensator for wind energy conversion system connected to utility grid,” Applied Power Electronics Conference and Exposition (APEC), 2010 Twenty-Fifth Annual IEEE , pp.1640-1650, 21-25 Feb. 2010 doi:10.1109/APEC.2010.5433452.
    URL: http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=5433452&isnumber=5433335
  73. Mohammed, O. A.; Nayeem, M.A.; Kaviani, A.K. “A laboratory based microgrid and distributed generation infrastructure for studying connectivity issues to operational power systems,” Power and Energy Society General Meeting, 2010 IEEE , pp.1-6, 25-29 July 2010doi:10.1109/PES.2010.5589693.
    URL: http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=5589693&isnumber=5588047
  74. Amin, M.; Mohammed, O.A. “Software Phase Locked Loop technique for grid-connected wind energy conversion systems,” Control and Modeling for Power Electronics (COMPEL), 2010 IEEE 12th Workshop on , pp.1-8, 28-30 June 2010 doi:10.1109/COMPEL.2010.5562424.
    URL: http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=5562424&isnumber=5562352
  75. Mohamed, A. A.; Elshaer, M.; Mohammed, O.A. “Reactive power compensation control for stand-alone synchronous generator-based wind energy conversion system,” IECON 2010 – 36th Annual Conference on IEEE Industrial Electronics Society , pp.3222-3227, 7-10 Nov. 2010, doi:10.1109/IECON.2010.5675052
    URL: http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=5675052&isnumber=5674827
  76. Mohamed, A.; Mohammed, O. “Power flow control in DC distribution systems,” North American Power Symposium (NAPS), 2010 , pp.1-7, 26-28 Sept. 2010 doi:10.1109/NAPS.2010.5618957.
    URL: http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=5618957&isnumber=5618939
  77. Mohamed, A.; Mohammed, O. “Smart power flow control in DC distribution systems involving sustainable energy sources,” Transmission and Distribution Conference and Exposition: Latin America (T&D-LA), 2010 IEEE/PES , pp.372-379, 8-10 Nov. 2010 doi: 10.1109/TDC-LA.2010.5762908.
    URL: http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=5762908&isnumber=5762851
  78. Osama A. Mohammed, and Andrew Rosales, “Evaluation of Radiated EMI in Pulse Width Modulated Motor Drives Due to Switching Characteristics,” American Society of Naval Engineers (ASNE) Electric Machines Technology Symposium , Philadelphia, PA, May 19-20, 2010.
  79. Ahmad Arshan Khan, Osama Mohammed, Mark Roberts, Rich McConnell, ” Parameter Optimization for Audible Noise Reduction in High Frequency Injection Based Low Speed Sensorless Control of PM Machines,” American Society of Naval Engineers (ASNE) Electric Machines Technology Symposium, Philadelphia, PA, May 19-20 2010.
  80. Amin, M. and Mohammed, O.A. “Vector oriented control of voltage source PWM inverter as a dynamic VAR compensator for wind energy conversion system connected to utility grid,” Applied Power Electronics Conference and Exposition (APEC), 2010 Twenty-Fifth Annual IEEE , pp.1640-1650, 21-25 Feb. 2010 doi:10.1109/APEC.2010.5433452.
    URL: http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=5433452&isnumber=5433335
  81. Mohammed, O.A.; Liu, S.; Liu, Z.; Khan, A.A. “Improved physics-based permanent magnet synchronous machine model obtained from field computation,” Electric Machines and Drives Conference, 2009. IEMDC ’09. IEEE International , pp.1088-1093, 3-6 May 2009. doi:10.1109/IEMDC.2009.5075339.
    URL: http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=5075339&isnumber=5075166
  82. Khan, A. A.; Mohammed, O.A. “Parameter optimization for sensorless position and speed control of permanent magnet motor at low speed using genetic algorithm,” Power Systems Conference and Exposition, 2009. PSCE ’09. IEEE/PES , pp.1-5, 15-18 March 2009. doi:10.1109/PSCE.2009.4840237
    URL: http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=4840237&isnumber=4839920
  83. Khan, A.A.; Mohammed, O.A. “Gradient descent based optimization for position and speed estimation of permanent magnet synchronous motor at low speed,” Power & Energy Society General Meeting, 2009. PES ’09. IEEE , pp.1-5, 26-30 July 2009 doi:10.1109/PES.2009.5275903.
    URL:http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=5275903&isnumber=5260217
  84. Khan, Ahmad Arshan; Mohammed, Osama “Wavelet filtering for position estimation of permanent magnet machine in carrier signal injection based sensorless control,” North American Power Symposium (NAPS), 2009 , pp.1-5, 4-6 Oct. 2009 doi:10.1109/NAPS.2009.5484072.
    URL:http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=5484072&isnumber=5483979
  85. Mohammed O.A., Liu S., and Liu Z. “Physics-based phase variable model of machines and transformers from electromagnetic field computations,” World Automation Congress, 2008, IEEE INSPEC Accession Number: 10411752, pp 1-5, Hawaii, HI. Sept 28-Oct 2, 2008
  86. Liu, Z.; Mohammed, O.A.; Liu, S. “An improved physics-based phase variable model of PM synchronous machines obtained through field computation,” Computation in Electromagnetics, 2008. CEM 2008. 2008 IET 7th International Conference on , pp.166-167, 7-10 April 2008
    URL:http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=4563407&isnumber=4563346
  87. Mohammed, O.A.; Liu, Z.; Liu, S. “Equivalent hardware representation of pm synchronous machines realized by a physics-based machine model for hardware-in-the-loop simulation applications,” Industrial Electronics, 2008. IECON 2008. 34th Annual Conference of IEEE , pp.1185-1188, 10-13 Nov. 2008 doi:10.1109/IECON.2008.4758122.
    URL: http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=4758122&isnumber=4757911
  88. Mohammed, O.A.; Liu, Z.; Liu, S. “HIL simulation of machine drives utilizing the physics-based phase variable model of machines,” Power and Energy Society General Meeting – Conversion and Delivery of Electrical Energy in the 21st Century, 2008 IEEE , pp.1-6, 20-24 July 2008 doi:10.1109/PES.2008.4596939.
    URL:http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=4596939&isnumber=4595968
  89. Mohammed, O.A.; Henao, L.; Rojas, F.; Khan, A.A. “Experimental real-time voltage and frequency controllers for a synchronous generator implemented in a laboratory power system test-bed,” Industrial Electronics, 2008. IECON 2008. 34th Annual Conference of IEEE , pp.3503-3506, 10-13 Nov. 2008 doi:10.1109/IECON.2008.4758525.
    URL:http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=4758525&isnumber=4757911
  90. Liu, Z.; Mohammed, O.A.; Liu, S. “A Novel Direct Torque Control Strategy for Doubly-Fed Wound Rotor Induction Machines,” Electric Machines & Drives Conference, 2007. IEMDC ’07. IEEE International , vol.1, no., pp.419-423, 3-5 May 2007 doi:10.1109/IEMDC.2007.382704.
    URL:http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=4270677&isnumber=4270600
  91. Mohammed, O.A.; Ganu, S.; Liu, Z.; Abed, N. “High Frequency Modeling Of Permanent Magnet Synchronous Motor Drive,” Electric Machines & Drives Conference, 2007. IEMDC ’07. IEEE International , vol.1, no., pp.318-321, 3-5 May 2007 doi:10.1109/IEMDC.2007.382686.
    URL:http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=4270659&isnumber=4270600
  92. Liu, Z.; Mohammed, O.A.; Liu, S. “A Novel Direct Torque Control of Doubly-Fed Induction Generator Used for Variable Speed Wind Power Generation,” Power Engineering Society General Meeting, 2007. IEEE , pp.1-6, 24-28 June 2007 doi:10.1109/PES.2007.386253.
    URL:http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=4276019&isnumber=4275199
  93. Mohammed, O.A.; Cristaldo, N.J.; Abed, N.Y. “Secure Power Grid Infrastructure Simulation-Test System Creation and Telecommunication Network Implementation,” Power Engineering Society General Meeting, 2007. IEEE , pp.1-6, 24-28 June 2007 doi:10.1109/PES.2007.386250
    URL:http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=4276016&isnumber=4275199
  94. Mohammed, O.A.; Abed, N.Y.; Ganu, S.C. “Real-Time Simulations of Electrical Machine Drives with Hardware-in-the-Loop,” Power Engineering Society General Meeting, 2007. IEEE , pp.1-6, 24-28 June 2007 doi:10.1109/PES.2007.386269
    URL:http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=4276035&isnumber=4275199
  95. Mohammed, O.; Abed, N.Y.; Shuo Liu “Characterization of transformer harmonic behavior using finite element analysis and discrete wavelet transforms,” SoutheastCon, 2007. Proceedings. IEEE , pp.354-357, 22-25 March 2007 doi:10.1109/SECON.2007.342924.
    URL:http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=4147454&isnumber=4144548
  96. O. A. Mohammed, S. Ganu, N. Abed, Z. Liu, and S. Liu, “Conducted Electromagnetic Interference Prediction in Integrated Motor Drive,” Proceedings of the 23rd Annual Review of Progress in Applied Computational Electromagnetics, March 19-23, 2007, Verona, Italy, 2007 ACES.
  97. Mohammed, O.A.; Ganu, S.; Abed, N. “Effect of change in pole shape design on harmonic contents of PM synchronous motor air gap flux density waveform,” SoutheastCon, 2007. Proceedings. IEEE , pp.399-403, 22-25 March 2007 doi:10.1109/SECON.2007.342932.
    URL:http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=4147462&isnumber=4144548
  98. O. A. Mohammed, S. Liu, and Z. Liu, “Physical modeling for pm synchronous machine with short circuit winding faults based on circuit-field coupled FE analysis,” Proceedings of the XVII International Conference on Electric Machines, ICEM 2006, Sept. 2-5, 2006 Chania, Crete Island, Greece.
  99. Mohammed, Osama A.; Liu, S.; Liu, Z. “FE-based Physical Phase Variable Model of PM Synchronous Machines with Stator Winding Short Circuit Fault,” Computational Electromagnetics (CEM), 2006 6th International Conference on , pp.1-2, 4-6 April 2006
    URL:http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=5754969&isnumber=5754894
  100. Mohammed, O.A.; Abed, N.Y.; Liu, S. “Investigation of the harmonic behavior of three phase transformer under non-sinusoidal operation using finite element and wavelet packets,” Magnetics, IEEE Transactions on , vol.42, no.4, pp.967-970, April 2006 doi: 10.1109/TMAG.2006.872467.
    URL:http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=1608369&isnumber=33780
  101. Mohammed, O.A.; Ganu, S.; Abed, N.; Liu, S.; Liu, Z. “High frequency PM synchronous motor model determined by FE analysis,” Magnetics, IEEE Transactions on , vol.42, no.4, pp.1291-1294, April 2006, doi: 10.1109/TMAG.2006.872412.
    URL:http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=1608450&isnumber=33780
  102. O. A. Mohammed, Z. Liu, S. Liu, and N. Abed, “Finite element based transformer operational model for dynamic simulations,” Proceedings of Progress in Electromagnetics Research Symposium, PIERS’2005, August 22-26, 2005, Hangzhou, China, oral presentation, pp. 496-500.
  103. O. A. Mohammed, S. Liu, and Z. Liu, “Improved FE-based pm synchronous machine physical model with core losses for dynamic simulations,” Proceedings of 15th Conference on the Computation of Electromagnetic Fields, COMPUMAG’2005, June 26-30, Shenyang, China.
  104. O. A. Mohammed, Z. Liu, and S. Liu, “FE-based nonlinear physical model of iron-core transformers for dynamic simulations,” Proceedings of 15th Conference on the Computation of Electromagnetic Fields,COMPUMAG’2005, June 26-30, Shenyang, China.
  105. Mohammed, O.A.; Liu, S.; Liu, Z.; Abed, N.; Ganu, S. “Innovations in teaching energy systems utilizing an integrated simulation environment,” Power Engineering Society General Meeting, 2005. IEEE , pp. 1192- 1197 Vol. 2, 12-16 June 2005. doi: 10.1109/PES.2005.1489507.
    URL:http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=1489507&isnumber=32012
  106. Mohammed, O.A.; Ganu, S.; Abed, N.; Liu, S. “Harmonic analysis of induction motor flux density waveform using wavelets in speed control application,” SoutheastCon, 2005. Proceedings. IEEE , pp. 60- 64, 8-10 April 2005 doi: 10.1109/SECON.2005.1423217.
    URL:http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=1423217&isnumber=30732
  107. Mohammed, O.A.; Abed, N.Y.; Liu, S. “Coupled physical modeling of power cables supplying non-linear loads using finite element method,” SoutheastCon, 2005. Proceedings. IEEE , pp. 55- 59, 8-10 April 2005 doi: 10.1109/SECON.2005.1423216.
    URL:http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=1423216&isnumber=30732
  108. Mohammed, O.A.; Liu, S.; Liu, Z.; Abed, N. “Physical phase variable models of electrical equipments and their applications in integrated drive simulation for shipboard power system,” Electric Ship Technologies Symposium, 2005 IEEE , pp. 163- 170, 25-27 July 2005, doi: 10.1109/ESTS.2005.1524670.
    URL:http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=1524670&isnumber=32591
  109. Mohammed, O.A.; Liu, Z.; Liu, S. “Stator power factor adjustable direct torque control of doubly-fed induction machines,” Electric Machines and Drives, 2005 IEEE International Conference on , pp.572-578, 15-18 May 2005 doi: 10.1109/IEMDC.2005.195780.
    URL:http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=1531398&isnumber=32672
  110. Mohammed, O.A.; Liu, Z.; Liu, S. “A novel sensorless control strategy of doubly-fed induction machines,” Electric Machines and Drives, 2005 IEEE International Conference on, pp.315-319, 15-18 May 2005, doi: 10.1109/IEMDC.2005.195740.
    URL:http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=1531358&isnumber=32672
  111. Mohammed, O.A.; Ganu, S.; Liu, S.; Liu, Z.; Abed, N. “Study of High Frequency Model of Permanent Magnet Motor,” Electric Machines and Drives, 2005 IEEE International Conference on , pp.622-627, 15-15 May 2005 doi: 10.1109/IEMDC.2005.195788.
    URL:http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=1531406&isnumber=32672
  112. Mohammed, O.A.; Abed, N.Y.; Liu, S.; Ganu, S. “Acoustic noise signal generation due to Magnetostrictive effects in electrical equipment,” Radio Science Conference, 2005. NRSC 2005. Proceedings of the Twenty-Second National , pp.45-52, 15-17 March 2005. doi: 10.1109/NRSC.2005.193984.
    URL:http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=1502112&isnumber=32168
  113. Mohammed, O.A.; Abed, N.Y.; Ganu, S.; Shuo Liu “Acoustic noise signal evaluation due to Magnetostrictive effects in electrical equipment,” Wireless Communications and Applied Computational Electromagnetics, 2005. IEEE/ACES International Conference on , pp. 690- 693, 3-7 April 2005 doi: 10.1109/WCACEM.2005.1469682.
    URL:http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=1469682&isnumber=31518
  114. O. A. Mohammed, S. Liu, and Z. Liu, “Improved FE-based pm synchronous machine physical model with core losses for dynamic simulations,” Proceedings of 15th Conference on the Computation of Electromagnetic Fields, COMPUMAG’2005, June 26-30, 2005, Shenyang, China.
  115. O. A. Mohammed, Z. Liu, and S. Liu, “FE-based nonlinear physical model of iron-core transformers for dynamic simulations,” Proceedings of 15th Conference on the Computation of Electromagnetic Fields,COMPUMAG’2005, June 26-30, 2005, Shenyang, China,
  116. O. A. Mohammed, Z. Liu, S. Liu, N. Y. Abed and L. J. Petersen “Finite Element Based Transformer Operational Model for Dynamic Simulations, ” PIERS 2005, Hangzhou, China, August 22-26, 2005, pp. 496-500.
  117. Mohammed, O.A.; Liu, S.; Liu, Z. “Physical modeling of electric machines for motor drive system simulation,” Power Systems Conference and Exposition, 2004. IEEE PES , pp. 781- 786 vol.2, 10-13 Oct. 2004, doi: 10.1109/PSCE.2004.1397716.
    URL:http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=1397716&isnumber=30397M
  118. O. A. Mohammed, S. Liu, Z. Liu, and N. Y. Abed, “Electric Machine Operational Modeling Utilizing Coupled Electromagnetic and Electric Drives Simulations,” Proceedings of the 11th International IGTE Symposium on Numerical Field Calculation in Electrical Engineering, September 13-15, 2004,Seggauberg (Graz), Austria, pp. 166-171.
  119. Mohammed, O.A.; Liu, S.; Liu, Z. “Physical modeling of PM synchronous motors for integrated coupling with Machine drives,” Magnetics, IEEE Transactions on, vol. 41, no.5, pp. 1628- 1631, May 2005, doi: 10.1109/TMAG.2005.846122.
    URL:http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=1430926&isnumber=30863
  120. Mohammed, O. A.; Liu, Z.; Liu, S. “A novel sensorless control strategy of doubly fed induction motor and its examination with the physical modeling of machines,” Magnetics, IEEE Transactions on , vol.41, no.5, pp. 1852- 1855, May 2005 doi: 10.1109/TMAG.2005.846500.
    URL:http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=1430982&isnumber=30863
  121. O. A. Mohammed, Castro J. and Yen K. K., “A Real-time Analysis of Electric Machines through Electromagnetic Field Computation and Laboratory Implementation,” Proceedings of the Annual ASEE conference, Salt Lake City, Utah, June 21-26, 2004, pp 859-866.
  122. O. A. Mohammed, N. Y. Abed, S. Ganu, and S. Liu, “Wavelet Analysis of Permanent Magnet Synchronous Machine Flux Density Harmonic Content with Different Pole Number Design,” 20th Annual Review of Progress in Applied Computational Electromagnetics, ACES’2004, April 19-22, 2004, Syracuse, NY, pp 441-448.
  123. O. A. Mohammed, S. Liu, and S. Ganu, “Implementation of Coupled Magnetomechanical Analysis Including Magnetostrictive Effects in Electric Machinery,” proceedings of the Second LACCEI International Latin American and Caribbean Conference for Engineering and Technology, LACCEI’2004, June 2-4, 2004, Miami, Florida.
  124. Mohammed, O.A.; Liu, S.; Liu, Z. “A phase variable PM machine model for integrated motor drive systems,” Power Electronics Specialists Conference, 2004. PESC 04. 2004 IEEE 35th Annual , vol.6, no., pp. 4825- 4831 Vol.6, 20-25 June 2004 doi: 10.1109/PESC.2004.1354853.
    URL:http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=1354853&isnumber=29758
  125. O. A. Mohammed, S. Liu, and Z. Liu, “Simulation of a Speed Regulation System Using Finite Element Motor Model,” proceedings of the Second LACCEI International Latin American and Caribbean Conference for Engineering and Technology, LACCEI’2004, June 2-4, 2004, Miami, Florida.
  126. O. A. Mohammed, N. Y. Nagy, and S. Liu, “Application of Finite Elements for the Physical Modeling of Power Cables,” proceedings of the Second LACCEI International Latin American and Caribbean Conference for Engineering and Technology, LACCEI’2004, June 2-4, 2004, Miami, Florida.
  127. Mohammed, O.A.; Liu, S.; Abed, N. “Effect of Increasing Pole Number on the Harmonic Content of Air-gap Flux Density Waveforms in Electric Machines,” SoutheastCon, 2004. Proceedings. IEEE , pp. 421- 423, 26-29 Mar 2004 doi: 10.1109/SECON.2004.1287954.
    URL:http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=1287954&isnumber=28706
  128. O. A. Mohammed and S. Liu “Study of Inverse Magnetostriction on Mechanical Deformations in Electrical Machinery,” Proceeding of IEEE Southeast Conference’2003, Jamaica, 26-29 March 2004, pp.433-436.
  129. Mohammed, O.A.; Ganu, S.C.; Liu, S. “Numerical analysis of Magnetostrictive effects in an electrical steel sample including experimental testing,” SoutheastCon, 2004. Proceedings. IEEE , pp. 428- 432, 26-29 Mar 2004 doi: 10.1109/SECON.2004.1287956.
    URL:http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=1287956&isnumber=28706
  130. Mohammed, O.A.; Castro, J.; Roig, G. “Hardware Implementation of a Real-Time Electromagnetic Field Analysis System for Engineering Educational Purposes,” SoutheastCon, 2004. Proceedings. IEEE , pp. 424- 427, 26-29 Mar 2004 doi: 10.1109/SECON.2004.1287955.
    URL:http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=1287955&isnumber=28706
  131. O. A. Mohammed, S. Liu, and S. Ganu, “Study of Magnetostriction Effects in Electrical Machinery,” CDROM of the Progress in Electromagnetics Research Symposium PIERS2004, March 28-31, 2004, Pisa, Italy, pp.759-762.
  132. O. A. Mohammed, S. Liu, and Z. Liu, “Physical Modeling Study of Electrical Machinery,” CDROM of the Progress in Electromagnetics Research Symposium PIERS2004, March 28-31, 2004, Pisa, Italy, pp.763-766.
  133. O. A. Mohammed, Z. Liu, and S. Liu, “Physical Machine Models for Integrated Motor Drive Applications,” American Society of Naval Engineers (ASNE) Electric Machines Technology Symposium EMTS2004, January 27-29, 2004, Philadelphia, USA.
  134. O. A. Mohammed, S. Liu, and S. Ganu, “Inverse Magnetostriction Effects on Electrical Machinery,” American Society of Naval Engineers (ASNE) Electric Machines Technology Symposium EMTS2004, January 27-29, 2004, Philadelphia, USA
  135. O. A. Mohammed, S. Liu and S. Ganu, “Magnetic Force Calculation in Magneto-mechanical Coupled Problems,” IEEE International Electric Machines and Drives Conference IEMDC2003, June 1-4, Madison, USA.
  136. O. A. Mohammed and S. Liu, “Investigation of Inverse Magnetostriction Effects in Electric Machinery,” proceedings of the 14th Conference on the Computation of Electromagnetic Fields COMPUMAG2003(CDROM), July 13-17, 2003, New York, USA.
  137. O. A. Mohammed, S. Liu, and S. Ganu, “Inverse Magnetostrictive Effects and Its inclusion in Magneto-Mechanical Modeling of Electric Machines,” proceedings of Middle East Power Conference, December 16-18, 2003, Egypt, pp. 511-517
  138. O. A. Mohammed, Z. Liu, and S. Ganu, “Physical Machine Models in Integrated Power System Applications,” proceedings of Middle East Power Conference, December 16-18, 2003, Egypt, pp.781-785.
  139. O. A. Mohammed, N. Abed, and S. Liu, “Wavelet Analysis of Permanent Magnet Synchronous Machine Air Gap Flux Density with Different Pole Number Designs,” proceedings of Middle East Power Conference, December 16-18, 2003, Egypt, pp.503-509.
  140. Mohammed, O. A., Calvert, T. E., McConnell, R. Petersen, L. and Petersen, L. “Computational Modeling of Coupled Transient Magneto-mechanical Problems,” Proceedings of the 18th Annual Review of Progress in Applied Computational Electromagnetics, ACES’2002, Monterey, CA. March 20-24, 2002, P.P 411-418.
  141. Kanai, Y., Yokoo, S., Togashi, M., Tsukamoto T., Kashiwa, T., Miyakawa, M. and Mohammed, O. A. “FEM Resonant Frequency Analysis for Lossy Case Using Subspace Iteration Method,” EMC Europe, Sorrento Italy, September 2002.
  142. Mohammed, O. A., Ganu S. C., Liu S. and Kanai, Y., “FEM Analysis and Testing of Magnetostrictive Effects in an Electrical Steel Sample,” Proceedings of the IGTE conference, Graz, Austria, September 2002.
  143. Mohammed O. A., S. Liu , S. Ganu and Y. Kanai ” Magnetic Force Calculation in Magneto-mechanical Coupled Problems,” Proceedings of the IGTE conference, Graz, Austria, September 2002.
  144. Y. Kanai, S. Yokoo, M. Togashi, T. Tsukamoto, T. Kashiwa, M. Miyakawa, and Mohammed O. A. “FEM Resonant Frequency Analysis for Lossy Case,” Proceedings of the IGTE conference, Graz, Austria, September 2002.
  145. Mohammed, O.A.; Liu, S.; Ganu, S.C. “Computation of transient magneto-mechanical problems in electrical machines,” SoutheastCon, 2002. Proceedings IEEE , pp.187-191, 2002 doi: 10.1109/.2002.995583.
    URL:http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=995583&isnumber=21481
  146. Mohammed, O. A. “Magnetomechanical modeling in Electromagnetic Devices including material anisotropy and Magnetostrictive effects,” Record of COMPUMAG, pp. 23-24, Evian, France, July, 2001.
  147. Mohammed O. A., Calvert, T. E. and McConnell, R. “Coupled Magnetoelastic FEM Formulation Including material Anisotropy and Magnetostriction Effects in magnetostatic problems,” Personated at ACES’2001, Monterey, CA. March 19-23, 2001, P.P 367-374.
  148. Mohammed, O.A. “Numerical prediction of Magnetostrictive behavior in non-oriented electrical steel sheets,” SoutheastCon 2001. Proceedings. IEEE , pp.179-182, 2001 doi: 10.1109/SECON.2001.923111.
    URL:http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=923111&isnumber=19960
  149. Mohammed, O.A. “Coupled Magnetoelastic finite element formulation of anisotropic magnetostatic problems,” SoutheastCon 2001. Proceedings. IEEE , pp.183-187, 2001 doi: 10.1109/SECON.2001.923113.
    URL:http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=923113&isnumber=19960
  150. Mohammed, O.A.; Castro, J.; Roig, G. “Hardware implementation of a real-time electromagnetic field analysis system for engineering education,” SoutheastCon 2001. Proceedings. IEEE , pp.254-258, 2001 doi: 10.1109/SECON.2001.923125.
    URL:http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=923125&isnumber=19960
  151. Mohammed O. A., Tom E. Calvert and Richard McConnell “Coupled Magnetoelastic Finite Element Formulation for Machinery Applications Including Anisotropy and Magnetostrictive Effects,” American Society of Naval Engineers (ASNE) 3rd Naval Symposium on Electric Machines, Philadelphia, PA, P.P. 44-49, December 4-7, 2000.
  152. Mohammed, O. A., “A Tensor Finite Element Formulation for Coupled Magnetoelastic Problems in Machinery Applications Including Material Anisotropy and Magnetostrictive Effects,” Presented at ICEF2000, Tianjin China, September, 2000.
  153. Mohammed, O.A. “Numerical prediction of Magnetostrictive behavior in non-oriented electrical steel sheets,” SoutheastCon 2001. Proceedings. IEEE , pp.179-182, 2001 doi: 10.1109/SECON.2001.923111.
    URL:http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=923111&isnumber=19960
  154. Bai Baodong, Xie Dexin, Wang Yanband, Zhou Deru, and Mohammed O. A., “Characteristic Prediction for a Large Completely Absorber-Lined Chamber with FDTD Method,” presented at the IEEE/ CEFC2000, conference, Milwaukee, WI, June 4-7, 2000.
  155. Siegret, R. and Mohammed, O. A., “Optimization of Low-Voltage Surge Protection Modules Via High Voltage Testing,” Proceedings of the IEEE Southeastcom’2000, Nashville, TN, April 2000.
  156. Mohammed, O. A., Meniv, D., Castro, J. and Roig, G. “An Implementation of A Real-time Experimental Analysis System for the Energy Conversion Laboratory,” Proceedings of the IEEE Southeastcom’2000, Nashville, TN, IEEE Xplore DOI 10.1109/SECON.1999.766110 March 25-28, 1999, pp. 138-141.
  157. Mohammed, O. A., “Genetic Algorithms and Their Practical Implementation Strategies for Design Optimization of Electromagnetic Devices,” Seminar on Advanced Computational Electromagnetics, Tokyo, Japan, pp. 6.1-6-18, June, 1999.
  158. Mohammed, O. A. ” The Genetic Algorithms and Practical Optimization Strategies in Electrical Devices,” (Invited Paper) 11th Annual Applied Computational Electromagnetic Society Conference (ACES’99), Vol. I, pp. 386-393, March 20-24, 1999, Monterey, California.
  159. Siegret, R.; Mohammed, O. “Evaluation of a hybrid surge testing generator configuration using computer based simulations,” Southeastcon ’99. Proceedings. IEEE , pp.193-196, 1999. doi: 10.1109/SECON.1999.766123.
    URL: http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=766123&isnumber=16590
  160. Mohammed, O. A., Sebastian, R. Y. and Roig, G. “An Implementation of a Real-time Experimental /analysis System for the Energy Conversion Laboratory,” Proceedings of IEEE Southeastcon’99, Lexington, KY, pp. 138-141, March 1999
  161. Mohammed, O. A., “Evolutionary Methods in Design Optimization of Electric Machines,” Proceedings of American Society of Naval Engineers (ASNE) Naval Symposium on Electric Machines, Annapolis Maryland, pp. 227-234, October 26-28, 1998.
  162. Sebastian, R.Y.; Mohammed, O.A. “A real-time electromagnetic field analysis system for the energy conversion laboratory,” SoutheastCon ’98. Proceedings. IEEE , pp.208-211, 24-26 Apr 1998. doi: 10.1109/SECON.1998.673330.
    URL:http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=673330&isnumber=14789
  163. Siegret, R.; Mohammed, O.A. “Computer based simulation for optimizing overvoltage protective devices for low voltage applications,” SoutheastCon ’98. Proceedings. IEEE , pp.105-108, 24-26 Apr 1998, doi: 10.1109/SECON.1998.673303.
    URL:http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=673303&isnumber=14789
  164. Mohammed, O.A. “GA optimization in electrical devices,” Antennas and Propagation Society International Symposium, 1997. IEEE., 1997 Digest , vol.3, no., pp.1696-1699 vol.3, 13-18 Jul 1997. doi: 10.1109/APS.1997.631503.
    URL:http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=631503&isnumber=13715
  165. Mohammed, O. A., ” GA Optimization in Electrical Machines,” (Invited Paper) IEEE International Electric Machines and Drives Conference, pp. TA1-2.1-TA1-2.6, Milwaukee, WI, May 18-21, 1997.
  166. Mohammed, O.A.; Sebastian, R.Y. “A real-time experimental-analysis system for the undergraduate electric energy laboratory,” SoutheastCon ’97. ‘Engineering New Century’., Proceedings. IEEE , pp.207-209, 12-14 Apr 1997 doi: 10.1109/SECON.1997.598670.
    URL:http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=598670&isnumber=13182
  167. Mohammed, O. A. ” Practical Issues in the Implementation of Genetic Algorithms to Electromagnetic Devices,” Presented at the 7th International IGTE Symposium on Numerical Field Calculation in Electrical Engineering, Graz, Austria, pp. 24-25, September 17-19, 1996.
  168. Mohammed, O. A. ” A Real-time Experimental Analysis System for the Undergraduate Electric Machinery Laboratory,” Presented at the 7th International IGTE Symposium on Numerical Field Calculation in Electrical Engineering, Graz, Austria, pp. 27-28, September 17-19, 1996.
  169. Mohammed, O. A., “Practical Issues in the Implementation of Genetic Algorithms to Electromagnetic Devices,” (Invited Paper) CBMAG’96, Anais do Congresso Brasileiro de Electromagnetismo, Ouro Preto, Brazil, pp. 207-213, November 24-27, 1996.
  170. Mohammed, O.A. “Practical issues in the application of genetic algorithms to optimal design problems in electromagnetics,” SoutheastCon ’96. ‘Bringing Together Education, Science and Technology’., Proceedings of the IEEE , pp.634-640, 11-14 Apr 1996 doi: 10.1109/SECON.1996.510148.
    URL:http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=510148&isnumber=10833
  171. Mohammed, O. A. and Üler, F. G. ” Genetic Algorithms for the Optimal Design of Electromagnetic Devices,” (Invited Paper) presented at the 11th Annual Applied Computational Electromagnetic Society Conference (ACES’96), Vol. I, pp. 386-393, March 20-24, 1996, Monterey, California.
  172. Mohammed, O. A. “Finite Element Solution of Eddy Current Problems in Electromagnetics,” (Invited Paper) presented at the 11th Annual Applied Computational Electromagnetic Society Conference (ACES’96), Vol. II, pp. 1228-1240, March 20-24, 1996, Monterey, California.
  173. Üler, G.F.; Mohammed, O.A. “Utilizing genetic algorithms for the optimal design of electromagnetic devices,” SoutheastCon ’95. ‘Visualize the Future’., Proceedings., IEEE , pp.92-95, 26-29 Mar 1995, doi: 10.1109/SECON.1995.513063.
    URL:http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=513063&isnumber=11317
  174. Mohammed, O. A. and Üler, F. G. ” Design of Electrical Devices by Genetic Algorithms,” Presented at the 6th International IGTE Symposium on Numerical Field Calculation in Electrical Engineering, Graz, Austria, September 26-28, 1994, pp. 245-250.
  175. Mohammed, O. A. and Üler, F. G. ” Neural Computations of Eddy Currents in Metallic Structures,” Presented at the 6th International IGTE Symposium on Numerical Field Calculation in Electrical Engineering, Graz, Austria, September 26-28, 1994, pp. 282-286
  176. Mohammed, O.A.; Park, D.C.; Merchant, R.S. “Implementation of an adaptive neural network short-term electric load forecasting system in the energy control center,” Neural Networks, 1994. IEEE World Congress on Computational Intelligence., 1994 IEEE International Conference on , vol.6, no., pp.3730-3737 vol.6, 27 Jun- 2 Jul 1994. doi: 10.1109/ICNN.1994.374803.
    URL:http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=374803&isnumber=8561
  177. Khatibi, M.H.; Mohammed, O.A. “An automatic two-area interconnected system load-frequency control design,” SoutheastCon ’94. ‘Creative Technology Transfer – A Global Affair’., Proceedings of the 1994 IEEE , pp.295-298, 10-13 Apr 1994 doi: 10.1109/SECON.1994.324320.
    URL:http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=324320&isnumber=7722
  178. Garcia, L.F.; Mohammed, O.A. “Forecasting peak loads with neural networks,” SoutheastCon ’94. ‘Creative Technology Transfer – A Global Affair’., Proceedings of the 1994 IEEE , pp.351-356, 10-13 Apr 1994 doi: 10.1109/SECON.1994.324334.
    URL:http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=324334&isnumber=7722
  179. Chang Seop Koh; Mohammed, O.A.; Song-yop Hahn “Design optimization of electromagnetic devices using shape design sensitivity analysis,” Southeastcon ’94. ‘Creative Technology Transfer – A Global Affair’., Proceedings of the 1994 IEEE , pp.157-161, 10-13 Apr 1994, doi: 10.1109/SECON.1994.324288.
    URL:http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=324288&isnumber=7722
  180. Samra, A. H. and Mohammed, O. A. ” Power Measurements in the Presence of Harmonic Distortion,” Proceedings of IEEE Southeastcon’93, April 1993, pp. 418-421.
  181. Mohammed, O. A., Gordon, H. W. and Arkadan A. A. ” Analysis of Electromagnetic Fields in Electrical Machines from Experimental Data for Educational Purposes,” Record of the Applied Computational Electromagnetic Society (ACES) 9th Annual Conference, Monterey, California, pp. 556-563, March 1993.
  182. Mohammed, O. A., Merchant, R., Üler, F. G. ” An Artificial Neural Network Environment for the Optimal Design of Geometric Boundaries in Electromagnetic Devices,” Record of the Applied Computational Electromagnetic Society (ACES) 9th Annual Conference, Monterey, California, pp. 712-719, March 1993.
  183. Mohammed, O. A., and Üler, F. G. ” An Efficient 3-D Finite Element Mesh Generator for Electromagnetic Analysis in Complex Volumes,” Record of the Applied Computational Electromagnetic Society (ACES) 9th Annual Conference, Monterey, California, pp. 696-703, March 1993.
  184. D. Park; O. Mohammed; R. Merchant; T. Dinh; C. Tong; A. Azeem; J. Farah; C. Drake “Forecasting abnormal load conditions with neural networks,” Neural Networks to Power Systems, 1993. ANNPS ’93., Proceedings of the Second International Forum on Applications of , pp.73-78, 1993 doi: 10.1109/ANN.1993.264346.
    URL:http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=264346&isnumber=6640
  185. Mohammed, O. A., Park, D. C. and Üler, F. G., ” Design Optimization of Electrical Devices Using Artificial Neural Networks,” Proceedings of the Second International Forum on the Applications of Artificial Neural Networks to Power Systems (ANNPS), April 19-22, 1993, Yokohama, Japan, pp. 361-364.
  186. D. Park; O. Mohammed; A. Azeem; R. Merchant; T. Dinh; C. Tong; J. Farah; C. Drake “Load curve shaping using neural networks,” Neural Networks to Power Systems, 1993. ANNPS ’93., Proceedings of the Second International Forum on Applications of, pp.290-295, 1993, doi: 10.1109/ANN.1993.264332.
    URL:http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=264332&isnumber=6640
  187. Mohammed, O. A., and Üler, F. G. “3D Transient Eddy Current and Field Calculations in Electrical Devices,” Proceedings of IEEE SouthCon, March 1992, pp. 67-70.
  188. Üler, F. G. and Mohammed, O. A. ” A New 3D Finite Element Grid Generator for Electromagnetic Analysis,” Proceedings of IEEE SouthCon, March 1992, pp. 44-47.
  189. Mohammed, O. A. and Üler, F. G. ” Finite Element Modeling of Anatomical Cross-Sections of Man for the Evaluations of Field Distributions Due to Implanted Electrodes,” Proceedings of IEEE SouthCon, March 1992, pp. 139-142.
  190. Mohammed, O. A., Park, D. C. and Üler, F. G. ” Optimal Design of Magnetic Circuits,” Proceedings of IEEE SouthCon, March 1992, pp. 117-121.
  191. Mohammed, O. A. and Gordon, H. W. ” Real-time Analysis of Energy Conversion Concepts from Laboratory Experimental Data for Teaching Undergraduate Electrical Engineering Students,” Proceedings of IEEE SouthCon, March 1992, pp. 129-132.
  192. Park, D.C., Mohammed, O. A., Kamienny, M. and Farah, J. ” Electric Load Forecasting With Neural Networks,” Proceedings of IEEE SouthCon, March 1992, pp. 171-175.
  193. Mohammed, O.A.; Üler, F.G. “Comparison of two techniques for the solution of the 3-D nonlinear transient eddy current problem,” SoutheastCon ’92, Proceedings., IEEE , pp.87-90 vol.1, 12-15 Apr 1992, doi: 10.1109/SECON.1992.202314.
    URL:http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=202314&isnumber=5226
  194. Mohammed, O. A. ” Recent Trends in 3-D Magnetic Field Computations,” (Invited Paper), IEE of Japan, Annual Meeting Record, Okayama, Japan, No. 3, pp. 2-11, January, 1992
  195. Mohammed, O. A. and Üler, F. G., ” Recent Results on Bench Mark Problem 10 – The Nonlinear Transient Eddy Current 3-D Model;” Proceedings of the European TEAM Workshop and International Seminar on Electromagnetic Field Analysis, Commission of the European Communities, Vol. EUR 14173 EN, pp. 37-61, Feb., 1992.
  196. Mohammed, O. A. and Üler, F. G., ” Recent Results on Bench Mark Problem 13 – The 3-D Nonlinear Magnetostatic Model;” Proceedings of the European TEAM Workshop and International Seminar on Electromagnetic Field Analysis, Commission of the European Communities, Vol. EUR 14173 EN, pp. 91-106, Feb., 1992.
  197. Park, D.C.; Mohammed, O.; El-Sharkawi, M.A.; Marks, R.J., II “An adaptively trainable neural network algorithm and its application to electric load forecasting,” Neural Networks to Power Systems, 1991., Proceedings of the First International Forum on Applications of , pp.7-11, 23-26 Jul 1991 doi: 10.1109/ANN.1991.213488.
    URL:http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=213488&isnumber=5569
  198. Park, D.C.; Osama, M.; El-Sharkawi, M.A.; Marks, R.J., II “Adaptively trained neural networks and their application to electric load forecasting,” Circuits and Systems, 1991., IEEE International Symposium on , pp.1125-1128 vol.2, 11-14 Jun 1991. doi: 10.1109/ISCAS.1991.176564.
    URL:http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=176564&isnumber=4470
  199. Mohammed, O.A.; Üler, F.G. “Finite Element Modeling Of Man For The Evaluation Of Implanted Electrodes,” Engineering in Medicine and Biology Society, 1991. Vol.13: 1991., Proceedings of the Annual International Conference of the IEEE , pp.700-701, 31 Oct – 3 Nov,1991, doi:10.1109/IEMBS.1991.684151.
    URL:http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=684151&isnumber=7498
  200. Üler, F. G. and Mohammed, O. A. “Calculation of Implanted Electrodes’ Potential Distributions Using A Finite Element Model of the Thoracic Cross-section,” Proceedings of Southern Biomedical Engineering Conference, Atlanta, GA., pp. 208-211, October, 1991.
  201. Park, D.C.; Mohammed, O. “Artificial neural network based electric peak load forecasting,” SoutheastCon ’91., IEEE Proceedings of , pp. 225-228 vol.1, 7-10 Apr 1991, doi: 10.1109/SECON.1991.147742.
    URL:http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=147742&isnumber=3921
  202. Mohammed, O.A.; Park, D.C.; Üler, F.G. “Optimal design of nonlinear magnetic circuits by finite elements and a dynamic programming approach,” SoutheastCon ’91., IEEE Proceedings of , pp.781-784 vol.2, 7-10 Apr 1991 doi: 10.1109/SECON.1991.147865.
    URL:http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=147865&isnumber=3921
  203. Mohammed, O.A.; Üler, F.G. “A new iterative scalar potential method for 3D eddy current calculations in electrical devices,” SoutheastCon ’91., IEEE Proceedings of , pp.785-789 vol.2, 7-10 Apr 1991, doi: 10.1109/SECON.1991.147866.
    URL:http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=147866&isnumber=3921
  204. Park, D.C.; Mohammed, O.; Oh, S.; Chung, S.Y.; Marks, R.J., II “A correlation based associative memory,” SoutheastCon ’91., IEEE Proceedings of , pp.901-904 vol.2, 7-10 Apr 1991, doi: 10.1109/SECON.1991.147890.
    URL:http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=147890&isnumber=3921
  205. Mohammed, O.A.; Üler, F.G.; Hagmann, M.J. “Determination of implanted electrode potential distributions in a man model,” SoutheastCon ’91., IEEE Proceedings of , pp.1130-1134 vol.2, 7-10 Apr 1991, doi: 10.1109/SECON.1991.147941.
    URL:http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=147941&isnumber=3921
  206. Mohammed, O. A. and Üler, F. G., “Results of A Nonlinear Magnetostatic 3-D Model;” Proceedings of the European TEAM Workshop and International Seminar on Electromagnetic Field Analysis, Commission of the European Communities, Vol. EUR 12988EN, pp. 117-129, 1990.
  207. Mohammed, O.A.; Üler, F.G. “3-D finite element grid generation in electromagnetics,” SoutheastCon ’90. Proceedings., IEEE , pp.684-688 vol.2, 1-4 Apr 1990 doi: 10.1109/SECON.1990.117904.
    URL:http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=117904&isnumber=3398
  208. Mohammed, O.A.; Gordon, H.W. “A computer controlled energy conversion laboratory for electrical engineering students,” SoutheastCon ’90. Proceedings., IEEE , pp.518-522 vol.2, 1-4 Apr 1990, doi: 10.1109/SECON.1990.117869.
    URL:http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=117869&isnumber=3398
  209. Mohammed, O.A.; Zhou, M.; Jones, W.K. “A state space modular approach and software for power electronics applications,” SoutheastCon ’90. Proceedings., IEEE , pp.783-786 vol.3, 1-4 Apr 1990, doi: 10.1109/SECON.1990.117924.
    URL:http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=117924&isnumber=3398
  210. Mohammed, O. A., Hagmann, M. J. and Üler, F. G.,” Finite Element Analysis produced by Implanted Electrodes in a Man Model;” IEEE Southern Biomedical Engineering Conference, Miami, Florida, November 1990, pp. 19-21.
  211. Mohammed, O. A. and Gordon, H. W. “An Energy Conversion Laboratory with Computerized Concept Analysis Module;” Records of American Power Conference, Chicago, pp. 204-209, April 1990.
  212. Mohammed, O. A. and Üler, F. G., ” Transient Fields and Eddy Currents in Nonlinear Thin Steel Plates;” European TEAM Workshop and International Seminar on Electromagnetic Field Analysis, Commission of the European Communities, Vol. EUR 12988EN, pp. 81-89, 1990.
  213. Mohammed, O. A. and Üler, F. G., “Results of A Non-Linear Magnetostatic 3-D Model;” Proceedings of TEAM WORKSHOP, Oxford, England, pp. 17- 20, April, 1990.
  214. Mohammed, O. A. and Üler, F. G., ” Transient Fields and Eddy Currents in Nonlinear Thin Steel Plates;” Proceeding of TEAM WORKSHOP, Oxford, England, pp. 24-28, April, 1990.
  215. Mohammed, O.A.; Hagmann, M.J.; Üler, F.G. “Implanted Electrodes Potential Distribution In A Man Model,” Engineering in Medicine and Biology Society, 1990., Proceedings of the Twelfth Annual International Conference of the IEEE , pp.1496-1497, 1-4 Nov 1990 doi: 10.1109/IEMBS.1990.691857.
    URL:http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=691857&isnumber=4080
  216. Mohammed, O.A.; Mundulas, J. “An electrostatic coupler for radio frequency monitoring on generators,” SoutheastCon ’89. Proceedings. Energy and Information Technologies in the Southeast., IEEE , pp.692-697 vol.2, 9-12 Apr 1989 doi: 10.1109/SECON.1989.132478.
    URL:http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=132478&isnumber=3643
  217. Mohammed, O.A.; Garcia, L.F. “An optimum finite element grid generator for triangulating rotating and fixed objects in electromagnetics,” SoutheastCon ’89. Proceedings. Energy and Information Technologies in the Southeast., IEEE , pp.804-808 vol.2, 9-12 Apr 1989 doi: 10.1109/SECON.1989.132511.
    URL:http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=132511&isnumber=3643
  218. Mohammed, O.A. “On the use of finite elements and dynamic programming for prediction of electromagnetic device geometries,” SoutheastCon ’89. Proceedings. Energy and Information Technologies in the Southeast., IEEE , pp.809-813 vol.2, 9-12 Apr 1989. doi: 10.1109/SECON.1989.132512.
    URL:http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=132512&isnumber=3643
  219. Mohammed, O.A. “A performance evaluation software for medical telemetry systems,” SoutheastCon ’89. Proceedings. Energy and Information Technologies in the Southeast., IEEE , pp.928-933 vol.2, 9-12 Apr 1989. doi: 10.1109/SECON.1989.132532.
    URL:http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=132532&isnumber=3643
  220. Mohammed, O. A. “Evaluation of implantable telemetry system performance using the CCETS software,” Engineering in Medicine and Biology Society, 1988. Proceedings of the Annual International Conference of the IEEE , pp.1239-1240 vol.3, 4-7 Nov. 1988. doi: 10.1109/IEMBS.1988.94892.
    URL:http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=94892&isnumber=3075
  221. Mohammed, O. A. “A miniature DC-DC converter for medical implants,” SoutheastCon ’88., IEEE Conference Proceedings , pp.430-434, 11-13 Apr 1988 doi: 10.1109/SECON.1988.194892.
    URL:http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=194892&isnumber=5020
  222. Mohammed, O. A. “An inverse technique for the design of electromagnetic devices,” SoutheastCon ’88., IEEE Conference Proceedings , pp.318-321, 11-13 Apr 1988 doi: 10.1109/SECON.1988.194868.
    URL:http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=194868&isnumber=5020
  223. Mohammed, O.A. “Fast solution techniques in 3D electromagnetic field problems,” SoutheastCon ’88., IEEE Conference Proceedings , pp.322-326, 11-13 Apr 1988 doi: 10.1109/SECON.1988.194869.
    URL:http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=194869&isnumber=5020
  224. Garcia, L.F.; Mohammed, O.A. “Automatic finite element grid generation in electromagnetics,” SoutheastCon ’88., IEEE Conference Proceedings , pp.571-575, 11-13 Apr 1988 doi: 10.1109/SECON.1988.194922
    URL:http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=194922&isnumber=5020
  225. Mohammed, O. A. “Inverse Finite Element Methods for the Design of Cores and Reactors,” Record of the International Symposium on Electromagnetic Fields in Electrical Engineering , Pavia, Italy, pp. 301-304, September 1987.
  226. Mohammed, O. A. and Salinger, J. D. ” A New Technique For Transformer Design in Power Electronics Applications Using Nonlinear Magnetic Field Solutions,” Record of Power Electronics Specialists Conference, Vol. 1, No 6, pp. 368-378, June 1987.
  227. Mohammed, O. A. ” A Miniature DC-DC Converter for Energy Producing Implantable Devices”, IEEE Engineering in Medicine and Biology Society International Conference, pp. 1147-1148, November 1987.
  228. Mohammed, O. A. ” Design of Radio Frequency Powered Coils for Medical Implants,” IEEE Engineering in Medicine and Biology Society International Conference, pp. 1378-1379, November 1987.
  229. Mohammed, O. A.” Numerical Determination of the Performance of Magnetically Coupled Coils in Medical Telemetry Systems,” Proceedings of the IEEE Southeastcon’87, March 1987, Vol. 2, pp. 394-397.
  230. Mohammed, O. A. ” Computation of Thick-Film Striplines Characteristic Parameters From Numerical Solution of Helmholtz Complex Wave Equation,” Proceedings of the IEEE Southeastcon’87, March 1987, Vol. 1, pp.119- 122
  231. Mohammed, O. A. ” Numerical Imposition of Neumann and Dirichlet Boundary Conditions for Three Dimensional Magnetic Field Computation,” Proceeding of the IEEE Southeastcon’87, March 1987, Vol. 1, pp. 125-128
  232. Mohammed, O. A. and Garcia, L. ” An Automatic Finite Element Grid Generator for Electromagnetic Field Computations,” Proceedings of the 1987 IEEE Miami Technicon’87 International Conference, October 1987, pp. 179-182.
  233. Mohammed, O. A. “CCETS- Computer Code for Evaluation of Implantable Telemetry Systems,” Proceedings of the 1987 IEEE Miami Technicon’87 International Conference, October 1987, pp. 324-329.
  234. Mohammed, O. A., Salinger, J. D., Jones, W. K. and Batty, J. R. ” A Miniature DC-DC Converter for Energy Producing Implantable Devices,” Proceedings of the 1987 IEEE Miami Technicon’87 International Conference, October 1987, pp. 338- 341.
  235. Mundulas, J. M., Mohammed, O. A. and Roig, G. A. “Improvements in Radio Frequency Generator Monitoring,” Proceedings of the 1987 IEEE Miami Technicon’87 International Conference, October 1987, pp. 388-390.
  236. Mohammed, O. A. ” Finite Element Analysis of Implantable Telemetry Systems,” Proceedings of IEEE Southeastcon’86, March 1986, pp. 116-119.
  237. Mohammed, O. A. and Batina, W. P. “A Method for Pacemaker’s Coil Design Using a Numerical Model,” IEEE Engineering in Medicine and Biology Society International Conference, November 1986, pp. 817- 820.
  238. Mohammed, O. A. “Finite Element Analysis of Thick-Film Hybrid Microcircuits” Record of the IEEE/CEFC Conference on Electromagnetic Field Computations, Schenectady, New York, pp. 113-116, October 1986.
  239. Mohammed, O. A. “Three Dimensional Calculation of Eddy Current Losses in Metallic Structures using Complex Magnetic Vector Potential,” Proceedings of IEEE Southeastcon’86, March 1986, pp. 177-181.
  240. Mohammed, O. A. “Computational Verification of the three Dimensional Finite Element Formulation in the Presence of Three Components of Excitation Current Densities,” Proceeding of IEEE Southeastcon’86, March 1986, pp. 1-5.
  241. Mohammed, O. A. “A Numerical Model for an Implantable Telemetry System: Coil Design and System Analysis Through Electromagnetic Field Coupling,” Proceedings the 1986 SouthCon Conference, Orlando, Florida, March 1986, Session No.7, Paper No.3.
  242. Mohammed, O. A. ” A Numerical Design and Analysis Tool for Implantable Telemetry Systems,” Record of the IEEE/CEFC Conference on Electromagnetic Field Computations, Schenectady, New York, pp. 87-90, October 1986.
  243. Mohammed, O. A., and Batina, W. P., “Computer Aided Design Tool for Implantable Telemetry Systems”, IEEE Engineering in Medicine and Biology Society International Conference, September, 1985, pp. 1155-1159
  244. Mohammed, O. A., “Utilizing Three Dimensional Magnetic Field Solution in the Calculation of Forces Acting on Current Carrying Conductor Segments,” Proceedings of IEEE Southeastcon’85, March, 1985 pp. 69-73.
  245. Mohammed, O. A., “Determination of Saturated Transformer Winding Inductances From Three Dimensional Finite Element Field Solutions,” Proceedings of IEEE Southeastcon’85, March, 1985, pp. 60-63.
  246. Mohammed, O. A., “A Virtual Work-Magnetic Vector Potential Method For the Calculation of Three Dimensional Forces on Magnetized Ferrous Cores,” Proceedings of IEEE Southeastcon’85, March, 1985, pp. 64-68.
  247. Mohammed, O. A., “On the Three Dimensional Magnetic Field Solutions in Electrical Devices by the Finite Element Method,” Proceedings of IEEE Southeastcon’84, April, 1984, pp. 67-71.